Ideal for parks, trails and other recreational locations

The Scanner is an infrared data recorder that has been specifically designed to count pedestrians and/or bicyclists in a variety of places, such as trails, outdoor walkways, sidewalks and commercialareas. This unit will register at distances up to 35 feet and does not require a reflector or other externalunit. Total volume can be recorded, as can individual time stamps of every recording. With time stamped data you can get directional data on which way people are moving.

The Scanner is built with industrial strength components to the highest level of quality. Armed with GPS capability and Bluetooth wireless technology, this device represents a new generation of people counters.

Optional External Sensor
In its basic configuration, the Scanner can be installed and pointed at the area you want to count. However, another option is to use the Scanner with an external sensor. This external sensor will detect and record data exactly the same way as the internal sensor, but it gives you more flexibility on how and where you can install the device. Using the external sensor, you can install the main Scanner unit in a more concealed location, yet still record data in hard-to-reach spots.

Wireless Data Retrieval
Volume data that is recorded by The Scanner can be read directly from the display. The Scanner also has a built-in RS-232 serial port that allows you to plug in and retrieve time-stamped & directional data.

However, one of the many unique features of The Scanner is the ability to also interface with it remotely using a wireless connection and a PDA.

Every Scanner has a built in Bluetooth wireless connection that can be used with our free JPDA software. Simply position yourself near The Scanner with your PDA and run the JPDA software. You can then use the PDA to end counts, retrieve data and start a new count, along with other options. (JPDA software is compatible with Windows Mobile 2003 and Mobile 5.0 for Pocket PC operating systems. Not compatible with Palm or SmartPhone operating systems.)

Once your data has been retrieved, take the PDA back to your office and the free JRead utility software can be used to retrieve the data from the PDA to your computer. The data you retrieve can then be output into several formats, including a standard Excel file for analysis and reporting.

When outputting to an Excel format, you are given several time interval options for how you want to see the data. The options are: Time Stamp, 1 Minute, 5 Minutes, 10 Minutes, 15 Minutes, 30 Minutes and 60 Minutes. The Time Stamp option produces a file listing the individual time stamp (to the second) of every recording in the study. The other options will group the data into the interval time selected. In both cases, the volume data is broken down by direction, so you can see the amount of people travelling in each direction.

The average human emits infrared radiation due to body temperature. An infrared detector can recognize the specific signature of this and determine when a person is, or is not, present.

Most passive infrared recorders that count pedestrians use a simple detection method to determine when to count. With these units, once the detection field has been triggered, new signatures cannot be recognized until the field has been cleared.

The Scanner is different.

The Scanner uses a complex series of algorithms that allows it to accurately record data in a wide variety of circumstances, from individual people to larger groups. In addition, there is no need for sensitivity adjustments on The Scanner. Its built-in algorithms allow it to be self adjusting, so its accuracy is always at the highest level.

Easy Setup & Installation
The Scanner is easy to program. The front cover of the unit is attached with two screws that can be removed for access to the two setup buttons: 'DO' and 'TAB'. These buttons help you navigate through the simple menu and start-up procedures. Alternatively, the unit can be programmed remotely from a PDA using Bluetooth wireless connection.

The Scanner is easy to install. No external reflector is needed. Simply mount The Scanner to any convenient location and aim it toward the area to be ounted.Included with The Scanner is a non-invasive installation kit comprised of installation brackets, screws and utility tools. This installation kit gives you everything you need to install The Scanner in the field without causing damage to trees.

The Scanner with Installation Kit
Includes The Scanner counter, Pasive Infared with Bluetooth and external sensor with short and long range lenses.

Part #JS-1IR-BT-EX-K - Price: $1095.00

Above Kit with PDA & JPDA Installed

Part #JS-1IR-BT-EX-K-PDA - Price: $1690.00

A PDA Kit is also available, which include a PDA and download cable. Click Here!