Never measure road tube spacing again!
The EZ Belt is a revolutionary new form of road tube that eliminates the need to measure tube spacing in the field.

The belt consists of two pneumatic tubes connected together at a 4 or 6 inch spacing by a thin layer of rubber. Since the two tubes are manufactured at a set distance apart, there is no need for you to do any measuring while in the field. When connected to a TRAX HS recorder, you can record highly accurate data.

TRAX HS recorders are the only data traffic data recorders in the world with the processing speed to be able to record data using such a small spacing and provide highly accurate speed, class, gap and volume information.

How it Works
The EZ Belt comes in two lengths - 14 feet for one lane applications and 26 feet for two lane applications. It also comes in two sizes - 4 inch spacing, recommended for average speeds below 50 mph, and 6 inch speeding recommended for average speeds above 50 mph.

The EZ Belt can be laid out in the lanes you want to record and taped down using mastic tape. Then, 25 foot mini-tubes are connected from the end of the belt back to the TRAX HS recorder.
 

Reduce Errors
Since it is manufactured with a set spacing, the EZ Belt eliminates potential errors with measuring the spacing between two road tubes in the field. In addition, one of the most common causes of erroneous data reading from an automatic traffic recorder is vehicles in opposite lanes in the error zone between the tubes at the same time. This chance for error is greatly reduced when you go from the old standard of eight feet between road tubes, to the new four inch spacing of the EZ Belt.

4 Inch EZ Belt - 1 Lane, 14 Feet  Part #J-6900-K  Price: $28.50
4 Inch EZ Belt - 2 Lane, 26 Feet  Part #J-6901-K  Price: $51.50
6 Inch EZ Belt - 1 Lane, 14 Feet  Part #J-6902-K  Price: $31.50
6 Inch EZ Belt - 2 Lane, 26 Feet  Part #J-6903-K  Price: $57.50